264x176, 2.7inch E-Ink/ E-Paper display HAT for Raspberry Pi
Make: WaveShare Electronics Co.
SKU: R-1850
Availability: IN STOCK

₹1,742.86 inc. GST
Ex GST: ₹1,477.00

Additional Info
  • Prices shown are Including GST.
  • B2B GST Credit Available.
  • Economy shipping at flat ₹59.
  • Free shipping on value > ₹2499.
  • Whatsapp Support @+917231066325
  • Estimated Delivery time?
  • Manufacturing Services

  • 264x176, 2.7inch E-Ink display HAT for Raspberry Pi

    This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    • No backlight required, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • Onboard 4x Keys
    • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Technical Specs

    • Operating voltage: 3.3V
    • Interface: 3-wire SPI, 4-wire SPI
    • Outline dimension: 85mm × 56mm
    • Display size: 57.288mm × 38.192mm
    • Dot pitch: 0.217 × 0.217
    • Resolution: 264 × 176
    • Display color: black, white
    • Grey level: 2
    • Full refresh time: 6s
    • Refresh power: 24mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°

    Development related resources at Product's Wiki page

    VCC 3.3V
    CS SPI chip select (Low active)
    DC Data/Command control pin (High for data, and low for command)
    RST External reset pin (Low for reset)
    BUSY Busy state output pin (Low for busy)

    Write a review

    Your Name:

    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below: