5.65inch ACeP 7-Color E-Paper E-Ink Display Module, 600×448 Pixels, 5.65inch e-Paper Module (F)
Make: WaveShare Electronics Co.
SKU: 2400
Availability: OUT OF STOCK

₹6,310.64 inc. GST
Ex GST: ₹5,348.00
Qty:
 


Additional Info
  • Prices shown are Including GST.
  • B2B GST Credit Available.
  • Economy shipping at flat ₹59.
  • Free shipping on value > ₹2499.
  • Whatsapp Support @+917231066325
  • Estimated Delivery time?
  • Manufacturing Services

  • 5.65" 7-COLOR E-PAPER MODULE
     

    Low Power Consumption, Wide Viewing Angle, Paper-Like Displaying Without Electricity

     
    • Size5.65"
    • Resolution600×448
    • Viewing Angle>170°
    • Display Color7-Color
    • Grey Scale2
    • CommunicationSPI
    • Display PanelE-paper
    • ExperiencePaper-like
    • EnvironmentAmbient Light Required
    • Display TypePassively Reflective
    Features At A Glance
     
    • Advanced Color ePaper (ACeP) technology, supports 7-Color display
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
    • Onboard voltage translator, compatible with 3.3V / 5V MCUs
    • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
    Specifications
     
    OPERATING VOLTAGE 3.3V/5V DISPLAY COLOR ACeP 7-Color
    INTERFACE 3-wire SPI, 4-wire SPI GREY SCALE 2
    OUTLINE DIMENSIONS 138.5 × 100.5mm FULL REFRESH TIME 15s
    DISPLAY SIZE 114.9 × 85.8mm REFRESH POWER 50mW (typ.)
    DOT PITCH 0.1915 × 0.1915mm STANDBY CURRENT <0.01uA (almost none)
    RESOLUTION 600 × 448 pixels VIEWING ANGLE >170°
    Advantages Of EINK
     

    E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
    E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

    SPI Control Interface
     

    Supports Control Boards Including Raspberry Pi/Jetson Nano/Arduino/STM32...

    VCC 3.3V/5V
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data / Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output
    Multiple Voltage Level Support
     

    Onboard Voltage Translator, Compatible With 3.3V / 5V MCUs

    Application Examples
     

    Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...

    Outline Dimensions
     

     

    Write a review

    Your Name:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below: