640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color
Make: WaveShare Electronics Co.
SKU: 2216
Availability: IN STOCK

₹​ 3,997.00
Qty:
 


Additional Info
  • Prices shown are exclusive of GST.
  • GST Input Tax Credit Available.
  • Economy shipping at flat ₹49.
  • Free shipping on value > ₹1999.
  • Whatsapp Support @+917231066325

  • 640x384 7.5inch E-Ink display HAT for Raspberry Pi, yellow / black / white three-color

    This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 640x384 resolution, with embedded controller, communicating via SPI interface, supports yellow, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
    • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    • Onboard voltage translator, compatible with 3.3V/5V MCUs
    • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

    Specifications

    • Operating voltage: 3.3V~5V
    • Interface: SPI
    • Outline dimension: 170.2mm × 111.2mm
    • Display size: 163.2mm × 97.92mm
    • Dot pitch: 0.255 × 0.255
    • Resolution: 640 × 384
    • Display color: yellow, black, white
    • Grey level: 2
    • Full refresh time: 16s
    • Refresh power: 38mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°

    SYMBOL DESCRIPTION
    VCC 3.3V~5V
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active

    7.5inch e-Paper HAT dimensions

    Write a review

    Your Name:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below: