Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4

‹ ›

Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4

Make: WaveShare Electronics Co.
SKU: 20885
Availability: IN STOCK

0 reviews | Write a review

₹4,609.08 inc. GST
Ex GST: ₹3,906.00

Qty:

Add to Wish List Add to Compare

Additional Info

Prices shown are Including GST.

B2B GST Credit Available.

Economy shipping at flat ₹59.

Free shipping on value > ₹2499.

Whatsapp Support @+917231066325

Estimated Delivery time?

Manufacturing Services

Tags: CM4, Raspberry Pi, Compute, Waveshare, Base Board

Description Reviews (0)

This is a dual Gigabit ethernet 5G/4G base board, which is designed for Raspberry Pi Compute Module 4. It is suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.

Developer's Resources

CM4 SOCKET	suitable for all variants of Compute Module 4
NETWORKING	Dual Gigabit Ethernet RJ45
	M.2 B KEY, for connecting 5G / 4G module
	Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication
USB	USB 3.2 Gen1 × 2
PIN HEADER	Raspberry Pi 40PIN GPIO header
DISPLAY	MIPI DSI port (15pin 1.0mm FPC connector)
CAMERA	MIPI CSI-2 port × 2 (15pin 1.0mm FPC connector)
VIDEO	HDMI × 2, supports 4K 30fps output
RTC	Real-time clock with a battery socket and ability to wake Compute Module 4
STORAGRE	MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
FAN HEADER	5V/12V (12V by default), allows speed adjustment and measurement
POWER INPUT	5V/2.5A
DIMENSIONS	99.6 × 87.0mm

Label	Name	Description
1	CM4 Connector	Applies to all versions of Compute Module 4
2	40PIN GPIO interface	Easy to connect various HAT modules
3	RJ45 Gigabit Ethernet port	Dual RJ45 Gigabit Ethernet port, support 10/100/1000M network access ETHERNET 0: CM4 native network port ETHERNET 1: USB expansion network port
4	HDMI port	Dual HDMI port, support dual 4K 30fps output
5	USB 3.2 Ports	2-way USB 3.2 Gen1 ports, support various USB devices
6	PWR & USB interface	5V DC power supply interface or USB burning interface
7	FAN interface	Easy to connect to the cooling fan, support speed regulation and speed measurement
8	CAM Interface	Dual MIPI CSI Camera Interface
9	4G/5G module status light	STA red light: module enable indicator NET green light: module running status indicator
10	Dual LED lamp holder	Red light: Raspberry Pi power indicator Green light: Raspberry Pi working status indicator
11	BOOT switch button	ON: Compute Module 4 boots to USB Type-C port OFF: Compute Module 4 boots to eMMC or Micro SD card
12	DISP1 interface	MIPI DSI display interface
13	M.2 B KEY	Communication module that supports access to 4G/5G or other USB channels
14	Nano-SIM Card Holder	Can be connected to a standard Nano-SIM card for 4G/3G/2G Internet access
15	Micro SD Card Interface	Used to insert a Micro SD card with the system to start the Compute Module 4 Lite
16	RTC Battery Connector	Can be connected to CR2032 button battery
17	RTC Interrupt Pin Switch	PI-RUN: RTC Trigger Interrupt CM4 Restart GN-EN: RTC Trigger Interrupt CM4 Power Off D4: RTC Trigger Interrupt D4 Pin
18	IO-VREF selection	CM4 IO logic voltage switch 3.3V or 1.8V
19	FAN Power Supply Options	You can choose 5V or 12V to drive the fan
20	RTC/FAN I2C bus selection	SDA0/SCL0: shared by I2C-10 and CSI/DSI GPIO3/2: shared by I2C-1 and 40PIN
21	System function switch	BT_DIS: Bluetooth disabled, only for CM4 version with antenna WiFi_DIS: WiFi disabled, only for CM4 version with antenna WP_DIS: Boot mode switch, only For use without EMMC boot or SD boot
22	RTL8153	USB Gigabit LAN chip

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad Good

Enter the code in the box below:

Continue

Shopping Cart

Write a review

Related Products (16)