Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4
Make: WaveShare Electronics Co.
SKU: 02732
Availability: IN STOCK

₹4,609.08 inc. GST
Ex GST: ₹3,906.00
Qty:
 


Additional Info
  • Prices shown are Including GST.
  • B2B GST Credit Available.
  • Economy shipping at flat ₹59.
  • Free shipping on value > ₹2499.
  • Whatsapp Support @+917231066325
  • Estimated Delivery time?
  • Manufacturing Services

  • This is a dual Gigabit ethernet 5G/4G base board, which is designed for Raspberry Pi Compute Module 4. It is suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.


    Developer's Resources


    CM4 SOCKET suitable for all variants of Compute Module 4
    NETWORKING Dual Gigabit Ethernet RJ45
    M.2 B KEY, for connecting 5G / 4G module
    Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication
    USB USB 3.2 Gen1 × 2
    PIN HEADER Raspberry Pi 40PIN GPIO header
    DISPLAY MIPI DSI port (15pin 1.0mm FPC connector)
    CAMERA MIPI CSI-2 port × 2 (15pin 1.0mm FPC connector)
    VIDEO HDMI × 2, supports 4K 30fps output
    RTC Real-time clock with a battery socket and ability to wake Compute Module 4
    STORAGRE MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
    FAN HEADER 5V/12V (12V by default), allows speed adjustment and measurement
    POWER INPUT 5V/2.5A
    DIMENSIONS 99.6 × 87.0mm

     

     

    Label Name Description
    1 CM4 Connector Applies to all versions of Compute Module 4
    2 40PIN GPIO interface Easy to connect various HAT modules
    3 RJ45 Gigabit Ethernet port Dual RJ45 Gigabit Ethernet port, support 10/100/1000M network access
    ETHERNET 0: CM4 native network port
    ETHERNET 1: USB expansion network port
    4 HDMI port Dual HDMI port, support dual 4K 30fps output
    5 USB 3.2 Ports 2-way USB 3.2 Gen1 ports, support various USB devices
    6 PWR & USB interface 5V DC power supply interface or USB burning interface
    7 FAN interface Easy to connect to the cooling fan, support speed regulation and speed measurement
    8 CAM Interface Dual MIPI CSI Camera Interface
    9 4G/5G module status light STA red light: module enable indicator
    NET green light: module running status indicator
    10 Dual LED lamp holder Red light: Raspberry Pi power indicator
    Green light: Raspberry Pi working status indicator
    11 BOOT switch button ON: Compute Module 4 boots to USB Type-C port
    OFF: Compute Module 4 boots to eMMC or Micro SD card
    12 DISP1 interface MIPI DSI display interface
    13 M.2 B KEY Communication module that supports access to 4G/5G or other USB channels
    14 Nano-SIM Card Holder Can be connected to a standard Nano-SIM card for 4G/3G/2G Internet access
    15 Micro SD Card Interface Used to insert a Micro SD card with the system to start the Compute Module 4 Lite
    16 RTC Battery Connector Can be connected to CR2032 button battery
    17 RTC Interrupt Pin Switch PI-RUN: RTC Trigger Interrupt CM4 Restart
    GN-EN: RTC Trigger Interrupt CM4 Power Off
    D4: RTC Trigger Interrupt D4 Pin
    18 IO-VREF selection CM4 IO logic voltage switch 3.3V or 1.8V
    19 FAN Power Supply Options You can choose 5V or 12V to drive the fan
    20 RTC/FAN I2C bus selection SDA0/SCL0: shared by I2C-10 and CSI/DSI
    GPIO3/2: shared by I2C-1 and 40PIN
    21 System function switch BT_DIS: Bluetooth disabled, only for CM4 version with antenna
    WiFi_DIS: WiFi disabled, only for CM4 version with antenna
    WP_DIS: Boot mode switch, only For use without EMMC boot or SD boot
    22 RTL8153 USB Gigabit LAN chip

     

     

     

    Write a review

    Your Name:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below: