WIN-IO-8DOM 8 Channel RS485 Modbus RTU Relay Module - 10A @ 240VAC - DIN RAIL Mount - CE, ROHS

The IO module communicate via RS485. The port can drive distances up to max 700 meters without the use of any repeater (this feature however also depends on the signal strength of the Modbus Master Device). The RS485 Digital IO module is sturdy, low power usage and easy to use.  The IO modules are mounted on DIN rail mountable casing and will also have a top acrylic safety cover on top for safety. The design of the modules incorporates ‘resettable Fuses’ to safeguard against reverse polarity connection both for Power and Communication port.

​​Features : 

• All inputs isolated
• Input power reverse polarity safety
• ESD Safety IEC 61000-4-2, ± 30KV contact, ± 30KV air
• EFT IEC 61000-4-4, 50A (5/50ms)
• 400V isolation.
• CRC Error check.
• No configuration needed on the IO board
• Power supply 10 - 30VDC

Specifications : 

• I/O Connectors 12 Pin 5.08 mm pitch pluggable screw Terminal Block
• Dimensions 72 mm x 195 mm
• Power Input Power – 12 – 24 VDC
• Typical – 12V DC @ 80mA
• Operating Temperature 0 – 60° C (32 ~ 140°F)
• Storage Temperature -20 - 70° C (-4 ~ 158°F)
• Storage Humidity 5 ~ 95 % RH, non – Condensing

​

• Channels 8
• Contact Form 1A, 1C
• Contact Material Ag Alloy
• Contact Capacity 10A @ 240VAC, 10A @ 28VDC
• Coil Voltage 5 – 48 VDC
• Coil Power 0.36 W
• Insulation Resistance 250MW
• Electrical Life 1 x 10^5
• Mechanical Life 1 x 10^7
• Operating Time 7 msec, Max 15 msec
• Release Time 2 msec, Max 6 msec

​

• Communication Speed 9600 – 19200 Kbps
• Data Bits 8
• Parity None
• Stop bit 1
• CRC Yes
• Slave ID Pre-configured (Provided with the IO module)
• Function code 0x05 and 0x0F (5 Single coil & 15 multiple coil)
• DO Register Address 0,1,2,3,4,5,6,7.

Write a review