NUCLEO F401RE - mbed enabled evaluation board for STM32F401RET6 |Supports Arduino | ST Microelectronics

The Nucleo-F401RE board provides an affordable and flexible way for users to try out new ideas and build prototypes with a high-performance STM32F401RET6 microcontroller.

The Arduino connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.

The Nucleo-F401RE board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer.

Each STM32 Nucleo board allows agile development with fine-tuning of both hardware and software on-the-fly at each prototyping stage. Investment in application shields is also protected as most shields can be used across various projects leveraging the scalability and diversity of the STM32 family. 

Features

• One high-performance STM32F401RET6 microcontroller with LQFP64 package
  • ARM Cortex-M4 CPU with FPU at 84MHz
  • 512 KBytes Flash
  • 12bit ADC 2.4 Msps up to 10 channels
  • Up to 10 timers
  • Up to 3x I2C, 3x USARTs, 4x SPIs, SDIO
  • USB 2.0 Full Speed with on-chip PHY
  • 96bit unique ID
• Two types of extension resources
  • Arduino Uno Revision 3 connectivity
  • STMicroelectronics Morpho extension pin headers for full access to all STM32F401RET6 I/Os
• On-board ST-LINK/V2-1 debugger/programmer with SWD connector
  • selection-mode switch to use the kit as a standalone ST-LINK/V2-1
  • drag and drop Flash programming (USB disk drive)
• Flexible board power supply
  • USB VBUS or external source (3.5 V, 5 V, 7 V - 12 V)
  • Power management access point
  • Three LEDs
  • USB communication (LD1), user LED (LD2), power LED (LD3)
• Two push buttons: USER and RESET
• USB re-enumeration capability: three different devices supported on USB
  • Virtual Com port
  • Mass storage
  • Debug port
• Comprehensive free STM32 software HAL library with a variety of software examples.

External Links

For more info on F401RE-NUCLEO visit : http://st.com/nucleoF401RE-pr

To enable mbed support visit : https://mbed.org/platforms/ST-Nucleo-F401RE/

http://www.emcu.it/NUCLEOevaBoards/NUCLEOevaBoards.html

Videos

ask a question about this product !

Write a review