Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Separated 4pin Header + SH1.0 3PIN Connector, Suitable For Raspberry Pi 5 Serial Port Debugging

User Manual / Datasheet / Example Codes Etc.

• Adopts original FT232RNL chip, with stable high-speed communication, reliability, and better compatibility.
• Built-in self-recovery fuse and ESD for over-current/over-voltage protection, counter-current proof, improving shock resistance.
• Onboard IO protection, anti-surge design, with stable communication and safety.
• Onboard TTL serial port 3.3V/5V level transilation circuit, for switching TTL communication level.
• Onboard 3x LED indicator, for checking power and signal transmitting status.
• Plastic case, sandblasting process, nice-looking and compact.

Specifications

• Model : USB to UART TTL
• HOST PORT : USB
• DEVICE PORT : UART
• Power Supply : 5V
• UART (TTL level) : 5V/3.3V
• Baud Rare : 300bps ~ 3Mbps
• Operating Temperature : -40℃~80℃
• CABLE : Black, PVC sheath, total length 1m
• OS : Support Win7/8/8.1/10/11, Mac, Linux, Android, WinCE, etc.

Raspberry Pi UART Debugging

Suitable For Raspberry Pi, Supports Multiple Connection Methods

Connect To Raspberry Pi 40PIN GPIO UART Interface Via Separated 4PIN Header

Pinouts Definition

• VCC : 3.3V or 5V output, configured by switch
• GND : Ground
• TXD : Connecting to MCU.RXD (signal direction: MCU.RX < < FT232 < < PC.TX)
• RXD : Connecting to MCU.TXD (signal direction: MCU.TX > > FT232 > > PC.RX)

Outline Dimensions

Write a review