IMX219 Camera, 800 megapixels and 77 FOV. Compatible with Jetson nano, support night vision. You can also use it with CM3/CM3+ expansion boards like Raspberry Pi Compute Module IO board, Compute Module IO Board Plus, Compute Module POE Board of Waveshare and the StereoPi board.

Package Includes:

• IMX219-77IR Camera x1
• 15-pin FFC (opposite sides contact) x1

Features

• Supports NVIDIA Jetson Nano Developer Kit, Compute Module 3/3+
• Supports night vision when works with infrared LEDs
  8 Megapixels
• Sensor: Sony IMX219
• Resolution: 3280 × 2464
• Lens specifications:
  • CMOS size: 1/4inch
  • Aperture (F): 2.35
  • Focal Length: 3.15mm
  • Angle of View (diagonal): 77 degree
  • Distortion: <14.3%
  • Lens dimensions: 6.5mm × 6.5mm
• 4 screw holes Used for attachment
• Provides 3.3V power output
• Dimension: 25mm × 24mm

Hardware connection

• Connect the camera to CSI interface of Jetson Nano.Set the metal side of FFC into Heat-sink
• Connect a HDMI LCD to Jetson Nano

Software setting

• Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
• Test camera with command:

DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e

Write a review