SIM7020E NB-IoT Module For Raspberry Pi Pico - Battery Included
Make: WaveShare Electronics Co.
SKU: 2530
Availability: IN STOCK

₹1,591.82 inc. GST
Ex GST: ₹1,349.00
Qty:
 


Additional Info
  • Prices shown are Including GST.
  • B2B GST Credit Available.
  • Economy shipping at flat ₹49.
  • Estimated Delivery time?
  • Free shipping on value > ₹2499.
  • Whatsapp Support @+917231066325

  • Overview

    The Pico-SIM7020E-NB-IoT is an NB-IoT (NarrowBand-Internet of Things) module designed for Raspberry Pi Pico. It supports multiple NB-IoT frequency bands, can be controlled via serial AT commands, and supports communication protocols like HTTP/MQTT/LWM2M/COAP, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.

    Resources

    https://www.waveshare.com/wiki/Pico-SIM7020E-NB-IoT

     

    Package Includes

    • Pico-SIM7020E-NB-IoT x1
    • Antenna x1
    • 20PIN female pin header x2
    • 40PIN male pin header × 1
    • 3.7V rechargeable Li-po battery x1

    Features

    • Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
    • UART communication, serial AT commands control, multiple communication protocols support, multiple cloud platform support
    • Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery, or recharging it in turn
    • 2x LED indicators, for monitoring the module operating status
    • Onboard Nano SIM card slot for NB-IoT specific card
    • Comes with development resources and manual (MicroPython examples)

    Specifications

    COMMUNICATION

    Frequency band

    LTE-FDD:B1/B3/B5/B8

    Data rate

    ≤26.15kbps(DL),≤62.5kbps(UL)

    Communication interface

    UART

    Baudrate

    300bps~921600bps (115200bps by default)

    Communication Protocol

    TCP/UDP/HTTP/HTTPS/MQTT/LWM2M
    /COAP/TLS/DTLS/DNS/NTP

    Applicable region

    Asia, Europe, Africa, Australia

    OPERATING

    Power supply

    Connect Li-polymer battery to the PH2.0 connector or the DC power to the USB port of Raspberry Pi Pico

    Battery interface

    3.7V ~ 4.2V

    Logical level

    3.3V

    Module standalone current

    Idle mode: 5.6mA

    Sleep mode: 0.4mA

    PSM mode: 3.4uA

    Dimensions

    73.5 × 24.00mm

    Pinout Definition

    Outline Dimensions

     

    Write a review

    Your Name:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below: