HCF4516B - Presettable Binary UP/DOWN Counter, DIP-16, ST Microelectronics

It is a PRESETTABLE BINARY UP/DOWN COUNTER, consists of four synchronously clocked D-type flip-flops (with a gating structure to provide T-type flip-flop capability) connected as a counter. This counter can be cleared by a high level on the RESET line, and can be preset to any binary number present on the jam inputs by a high level on the PRESET ENABLE line. Synchronous cascading is accomplished by connecting all clock inputs in parallel and connecting the CARRY OUT of a less significant stage to the CARRY IN of a more significant stage.

HCF4516B can be cascaded in the ripple mode by connecting all clock inputs in parallel and connecting the CARRY OUT to the clock of the next stage. If the UP/ DOWN input changes during a terminal count, the CARRY OUT must be gated with the clock, and the UP/DOWN input must change while the clock is high. This method provides a clean clock signal to the subsequent counting stage. 

Technical Datasheet (487.69 KB)  

• IMPORTANT NOTICE

  All products sold at rarecomponents.com are 100% Genuine parts made by the original manufacturers as listed on the product page. We do not stock duplicate parts in any case. All goods are checked before sending them out. The user assumes all responsibility and liability for proper and safe handelling of the goods after receiving the shipment. Image shown with the products like Integrated Circuits & Chemicals shows the package of Device and not the actual product in some cases. Please refer to the product description for exact specification about product and its manfacturer. For any further clarification you can contact us by the means provided on the contact us page.

Write a review