ESP32-S3 Development Board, 32-Bit LX7 Dual-Core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch IPS Round LCD, 240×240 Resolution, Supports WiFi/Bluetooth

ESP32-S3-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28inch LCD display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly.

User Manual / Datasheet / Example Codes Etc.

• Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (BLE), with onboard antenna
• Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
• Type-C connector, keeps it up to date, easier to use
• Onboard 1.28inch LCD display, round IPS panel, 240×240 resolution, 65K color
• Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture
• Onboard 3.7V lithium battery recharge/discharge header and GPIO headers
• Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
• Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions

Onboard 1.28inch LCD Screen

Round IPS Panel, 240×240 Resolution, 65K Color

30 × Multi-Function GPIO Pins

What's On Board

1. 

1.  ESP32-S3R2

• The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 2MB PSRAM

2.  W25Q128JVSIQ

• 16MB NOR-Flash

3.  QMI8658

• 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.

4.  ME6217C33M5G

• 800mA output, low dropout, high rejection rate

5.  CH343P

• USB to UART chip

6.  ETA6096

• high-efficiency Lithium battery recharge manager

7.  1.27mm pitch headers

• Adapting multiple GPIO pins

8.  BOOT button

• Press it before resetting to enter download mode

9.  RESET button

10.  MX1.25 battery header

• MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging

11.  USB Type-C connector

• USB to UART, for programming and log printing

12.  2.4GHz ceramic antenna

Dimensions

Write a review