2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.

• → Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• → Optional interfaces: SPI (default), or I2C, configured via onboard resistor
• → Brings control pins for host boards like Arduino/STM32
• → Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
• → Driver: SSD1305
• → Interface: SPI / I2C
• → Display size: 2.23inch diagonal
• → Display color: white
• → Resolution: 128×32
• → Viewing angle: >160°
• → Power supply voltage: 3.3V/5V
• → Logic level: 3.3V

Development Resources - 

https://www.waveshare.com/wiki/2.23inch_OLED_HAT

Write a review