SIM7080G NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable
Make: WaveShare Electronics Co.
SKU: 2257
Availability: PRE ORDER

₹2,935.84 inc. GST
Ex GST: ₹2,488.00
Qty:
 


Additional Info
  • Prices shown are Including GST.
  • B2B GST Credit Available.
  • Economy shipping at flat ₹59.
  • Free shipping on value > ₹2499.
  • Whatsapp Support @+917231066325
  • Estimated Delivery time?
  • Manufacturing Services

  • SIM7080G NB-IoT / Cat-M(eMTC) / GNSS HAT for Raspberry Pi, Globally Applicable

    This is a telecommunication HAT which features multi communication functionalities: NB-IoT (NarrowBand-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System).

    With the developing of telecommunication technology LTE, 2G/3G networks are fading away, the future world would be dominated by IoT technologies consisting of low bandwidth NB-IoT/Cat-M and high bandwidth 4G/5G standards.

    This HAT supports global bands of NB-IoT and Cat-M, as well as positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.


    Package Includes

    SIM7080G Cat-M/NB-IoT HAT x1
    LTE antenna x1
    GPS External Antenna (B) x1
    USB type A plug to micro plug cable x1
    2×20PIN female header x1
    RPi screws pack (2pcs) x1


    Features

    • → Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
    • → Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
    • → Supports GNSS positioning (GPS, GLONASS, BeiDou, and Galileo)
    • → Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
    • → Breakout UART control pins, to connect with host boards like Arduino/STM32
    • → Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
    • → SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
    • → 3x LED indicators, easy to monitor the working status
    • → Baudrate: 300~3686400 bps
    • → Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
    • → Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    How to Use?

    Click to learn using this product at resource section


    Write a review

    Your Name:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below: