3.2inch 320x240 Touch LCD (D), With Touch Panel And Stand-Alone Controllers
Make: WaveShare Electronics Co.
SKU: 16498
Availability: IN STOCK

₹1,603.62 inc. GST
Ex GST: ₹1,359.00
Qty:
 


Additional Info
  • Prices shown are Including GST.
  • B2B GST Credit Available.
  • Economy shipping at flat ₹59.
  • Free shipping on value > ₹2499.
  • Whatsapp Support @+917231066325
  • Estimated Delivery time?
  • Manufacturing Services

  • This is a 3.2inch 320x240 Touch LCD (D) With Touch Panel And Stand-Alone Controllers.

    Features

     

    • 320 × 240 resolution LCD, with 262K color for clear color picture display
    • Onboard touch control chip, smoother touch effect than the touch panel controlled by AD pins
    • Backlight programmable, more power saving
    • Comes with development resources and manual (example for STM32)

     

    Specifications

    OPERATING VOLTAGE 3.3V RESOLUTION 320 × 240 Pixels
    INTERFACE 8080 Parallel+SPI DISPLAY SIZE 48.6 × 64.8mm
    DISPLAY PANEL TN PIXEL PITCH 0.198 × 0.198mm
    LCD CONTROLLER ILI9341 MODULE SIZE 94.97 × 62.24mm

     

    Resources

    User Guide

     

    Pinouts

    PIN NO. SYMBOL DESCRIPTION FUNCTION
    1 5V 5V power supply When powered from 5V supply,
    Pin 1 & Pin 2 as power input,
    Pin 33 & Pin 34 provide 3.3V output.
    2 GND Ground GND
    3 ~ 18 D0 ~ D15 Data pin D0-D15
    19 CS LCD chip select Low active
    20 RS Instruction/Data register selection RS = 1 : Data Register
    RS = 0 : Instruction Register
    21 WR Write WR = 0, RD = 1
    22 RD Read WR = 1, RD = 0
    23 RESET Reset the controller chip Low active
    24 NC Not connect Not connect
    25 BLVCC 5V or 3.3V Backlight VCC
    26 BLGND Ground Backlight GND
    27 BLCNT Backlight brightness adjustment Control the backlight brightness via PWM
    28 TP_IRQ Touch panel interrupt Low level while the touch panel detects pressing
    29 TP_CS Touch panel chip select Low active
    30 TP_SCK Touch panel SPI clock connects to SPI SCK
    31 TP_SI Touch panel data input connects to SPI MOSI
    32 TP_SO Touch panel data output connects to SPI MISO
    33 3.3V 3.3V power supply When powered from 3.3V supply,
    Pin 33 & Pin 34 as power input,
    Pin 1 & Pin 2 keep NC.
    34 GND Ground  

    Write a review

    Your Name:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below: