Prices shown are Including GST.
B2B GST Credit Available.
Economy shipping at flat ₹49.
Free shipping on value > ₹2499.
Whatsapp Support @+917231066325
PADI IoT Stamp - Realtek RTL8710AF WiFi Module - PINE64
PADI IoT Stamp is a highly integrated, single-chip, low power WiFi controller with built-in antenna. The stamp combines an ARM Cortex M3, integrated Flash and RAM, WLAN MAC, WLAN baseband, RF balun, PA, LNA receiver, saw filter and power management module. Designs for makers with high speed SPI/I2C/UART interfaces for IoT applications with minimum Printed Circuit Board (PCB) area requirement. The PADI IoT Stamp is even smaller than a US stamp size.
PADI IoT Stamp suitable for standalone system or act as slave device. When use as slave device, it has full function AT commands set for host computer to fully utilize WiFi protocol functionality.
Designed for battery powered Internet of Things (IoT) devices in mind, PADI IoT Stamp allows makers to build various low power consumption online cloud base IoT projects.
2.4 GHz - 2.5 GHz (2400 MHz - 2483.5 MHz)
ROM / RAM / FLASH :
Operating Voltage :
Operating Temperature :
Wireless Network Mode :
ARM Cortex M3 (83 MHz)
1MB / 512KB / 1MB
Up to 1 (41.5 Mbps)
Up to 3 (2 x 4 Mbps + 1 x 38400 bps)
Up to 4
Up to 1 (3.4 Mbps)
Up to 19 (including 10 GPIO_INT)
3.0 V ~ 3.6 V (recommended 3.3 V)
-20 ℃ ~ 85 ℃
24 mm x 16 mm x 0.8 mm
Station / SoftAP / SoftAP + Station
Security Standard :
Firmware Update :
Network Protocol :
User Configuration :
802.11b : 11 Mbps , 802.11g : 54 Mbps , 802.11n : 150 Mbps
MD5 / SHA / HMAC-SHA
WPA / WPA2
WEP / TKIP / AES
UART / OTA / JTAG
FreeRTOS, ARM® mbed™ (future planning)
IAR, openOCD, J-Link
TCP / UDP / HTTP / FTP
AT Commands, Cloud Server, Android / iOS APP